Precor AMT Series Service Manual page 68

Brake Test
Battery Test
SPM
RPM Test
CrossRamp
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
1 Touch Brake Test, then Touch START.
2 Use the machine control paddle to change
the resistance up and down. The
AMT, RBK,
resistance changes will be displayed in
UBK, EFX
power bits.
3 Touch STOP to end the test. Touch 
BACK to Systems Test.
1 Touch Battery Test, and then Touch
START.
2 The console will display the voltage of
AMT, RBK,
the battery.
UBK, EFX
3 Touch STOP to end the test. Touch 
BACK to Systems Test.
1 Touch SPM Test, and then START.
2 The console will display Pulse. The
pulse is showing a count of zero
crossings from the generator. SPM shows
a software averaged version of pulse.
AMT, EFX
An averaged pulse per minute will
display as Minimum and a Maximum pulse.
3 Touch STOP to end the test. Touch 
BACK to exit to Systems Tests.
1 Touch RPM Test, and then START.
2 The console will display Pulse. The
pulse is showing a count of zero
crossings from the generator. RPM shows
RBK, EFX
a software averaged version of pulse.
3 Touch STOP to end the test. Touch BACK
to exit to Systems Test.
1 Touch CrossRamp Test , and then Touch
START.
2 Use the machine control paddle to change
the CrossRamp. The console will display
the analog to digital (A/D) and Glitches
EFX Only
incline position number. Available
battery voltage to the lift system will
be displayed.
3 Touch STOP to end the test. Touch 
BACK to Systems Test.
Page 66