Figure 222: Generator Belt - Precor AMT Series Service Manual

Figure 222: Generator Belt

9 The generator belt gauge should read approximately 85 ±5 lbs. If
the belt tension is significantly high or low the belt tension
may be adjusted by loosening or tightening the
mounting adjustment bolt. See
142)
10 Loosen or tighten the generator adjustment nut and bolt until the
belt gauge reads approximately 85 ±5 lbs. See
Instructions
(on page 142)
11 Tighten the two bolts that secure the
the frame. Torque to 160 inch pounds
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Drive Belt Gauge Instructions
generator mounting bracket to
generator
(on page
Drive Belt Gauge
Page 284