Updating P80 Software - Precor AMT Series Service Manual

Manage Settings

Updating P80 Software

The P80 console is driven by software with innovative features which
enhances the user's experience during a workout. Periodically the
software will need to be updated with improvements to the functionality
and features. Procedure will explain how to update the software at the
customer's location using a USB Flash drive device for P80 consoles.
A USB Flash drive device with pre-loaded software or a web site
location where you can upload the software onto a USB Flash drive
device will be provided by PRECOR.
Procedure to update (Flash) software for P80 consoles:
1 The Welcome screen will be the first screen you see when you
approach the P80 console. Press the Pause key and continue holding
it down while you double press (prior to 1.1 version software
release) or single press
sequential order an X configuration on the Volume and Channel key
pad (Channel Up, Volume Down, Volume Up, Channel Down).
Release the Pause key when done pressing the arrows. Note: The
keypad X configuration sequence should be not faster than 1 second
between each key stroke. Any speed faster than 1 second may result
in an unsuccessful access to the sign-in screen.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
equipment can be
registered.
Use this setting to
save your
equipment settings
to a USB flash drive,
or to import settings
from a USB flash
drive.
(1.1 version or after software release) in
Equipment. and Registration
Procedure
71)
See Procedure,
Touch Manage P80 Settings
Manage
(Cloning)
Settings
(Cloning)
(on page
(on page 88)
Page 61