Inspecting And Adjusting The H-Brake Belt Tension; Procedure; Figure 50: H-Brake Belt Tension Gauge - Precor AMT Series Service Manual

Inspecting and Adjusting the H-brake Belt Tension

WARNING: Before continuing with this procedure, review the Warning and
Caution statements listed in the Warning and Caution Statements and
General Safety Guidelines Section, Things You Should Know.

Procedure

1 Remove the gasket, top,
front, rear, left and right side covers
Cover Replacement
per, (on page 152) Procedure .
2 Place a belt gauge on the
H-brake belt.

Figure 50: H-Brake Belt Tension Gauge

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 129