Flash Programming The Upper Pca; Figure 14: Hhhr Cable Assembly - Precor AMT Series Service Manual

Figure 14: HHHR Cable Assembly

8 Replace the HR PCA access panel removed in step 3.
9 Check treadmill operation per Checking the AMT Operation
(on page 125).

Flash Programming the Upper PCA

This unit utilizes an upper PCA software system that is capable of
onsite upper PCA software uploading (re-programming). The software
upload may be accomplished with the use of a PDA (palm device) or a
laptop computer.
If a palm device is to be used it must use OS software version 3.2 or
higher. Currently, we have only tested devices manufactured by Palm,
but other manufacturer's palm devices may also function correctly.
If a palm device is to be used, the appropriate software must be
available in the palm device. A PDA containing the appropriate software
may be ordered from Precor or it may be downloaded to the PDA from your
desktop or laptop computer via the hot sync function. With the PDA
inserted in the hot sync cradle, download to Precor IFP (in field
programmer) directory.
If a laptop computer is to be used, the computer's DB9 serial port will
be used for the upload.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 39