Front Cover Removal; Figure 66: Front Top Cover Release; Figure 67: Top Cover - Precor AMT Series Service Manual

Figure 66: Front Top Cover Release

3 Standing at the side of the AMT, pull the loose end of the top cover
up to apply slight pressure on the locking tabs. With the heel of
your hand, gently tap the back cover just below the top cover, see
figure below. The top cover should release from the back cover,
remove the top cover and set aside.

Figure 67: Top Cover

Front Cover Removal

1 Remove the two #10 x ¾ inch screws located at the bottom corners of
front cover.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 154