On-Site Preventive Maintenance (Service Technician) - Precor AMT Series Service Manual

On-Site Preventive Maintenance (Service Technician)

♦ When you are called to service a AMT, perform these preventive
maintenance activities:
♦ Perform the software diagnostics. Check LED and keypad function.
Record the odometer reading.
♦ Check stride rate and stride length sensor function (is the stride
rate and stride length displayed when the unit is in operation?).
♦ Visually inspect the drive belts and flat belts for cracks, fraying
or excessive wear.
♦ When furnished, inspect the optional power supply cords. If a power
supply cord(s) is damaged, install a new power supply.
♦ Visually examine all wires and check connectors and wire
connections. Secure connections and replace wiring as necessary.
♦ Cardio Theater cord management must be observed.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 146