Figure 247: Generator Belt - Precor AMT Series Service Manual

Figure 247: Generator Belt

25 The belt gauge should read approximately 85 ±5 lbs. If the belt
tension is significantly high or low the belt tension may be
adjusted by loosening or tightening the
adjustment bolt. See
26 Loosen or tighten the generator adjustment nut and bolt until the
belt gauge reads approximately 85 ±5 lbs lbs. See
Instructions
(on page 142)
27 Tighten the two bolts that secure the
the frame. Torque to 160 inch pounds
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Drive Belt Gauge Instructions
generator mounting
(on page 142)
Drive Belt Gauge
generator mounting bracket to
Page 305