Figure 12: P30 Upper Pca & Metric Board - Precor AMT Series Service Manual

Figure 12: P30 Upper PCA & Metric Board
7 Connect the Metrics cable to the Metric PCA.
8 Replace the P30 Rear Cover removed step 11 and secure the cover with
the screws 6 screws. Torque to 10 inch pounds.
Note: Do not use an electric screw driver or over tighten the screws. Over
tightening may damage the console. This type of damage is not covered
under warranty.
9 Replace the P30 Option Cap back cover removed step 12 and secure the
cover with the screws 2 screws. Torque to 10 inch pounds.
Note: Do not use an electric screw driver or over tighten the screws. Over
tightening may damage the console. This type of damage is not covered
under warranty.
10 Place the P30 console on the maintenance access hook.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 36