Precor AMT Series Service Manual page 71

Speaker Test
Numeric
Backlight Test
Numeric Display
Test
Heart Rate
Step Count Reset
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
1 Touch Speaker Test.
2 This test will send an audible sound to
the speaker mounted in the headphone
jack and while providing a graphic of a
All
scrolling bar on the screen. When the
test is complete it will automatically
exit to the Systems Test screen.
1 Touch Numeric Backlight Test.
2 This tests the back lights of the lower
display just above the paddle controls.
The back lights of the display will
All
illuminate in sequence and then
automatically exit to the Systems Test
screen.
1 Touch Numeric Display Test.
2 This will test the numeric LCD display
just above the paddle controls. All the
All
numeric characters will be displayed in
sequence and then automatically exit to
the Systems Test.
1 Touch Heart Rate.
2 Grasp both of the heart rate grips on
the handlebar, after a couple of seconds
All
the heart rate will be displayed.
3 Touch
1 Touch Step Count Reset.
The screen will display:
Current total step count
Step Count Reset
Odometer Value at the last reset.
1 During this step it is necessary to
pedal the AMT while the Step Count is
AMT12 Only
being reset, touch START.
The Current Total Step Count will go to "0".
The Step Count Reset will increment up.
The Odometer will display the total miles
recorded at the time of the reset.
1 Touch Back to System Tests.
 BACK to exit to Systems Test.
Page 69