Machine Controls Unresponsive; Description; Possible Causes; Possible Remedies - Precor AMT Series Service Manual

5 Inspect jumper cable connecting fitness equipment to the video drop.
If it is visibly damaged or disconnected, replace or reconnect.
it passes visual inspection, swap with a known good jumper cable.
If the TV channel now appears, the cable is the cause.
jumper cable.
check on the F connectors.
6 Inspect the cable that runs from the patch panel at the bottom of
the machine to the console.
reconnect or replace.
known good cable to bypass this cable.
replace the coax cable running through the machine.
7 Connect the machine to a known good A/V drop.
appears on the console, verify the drop is good.
customer contact their A/V service technician to repair the drop.
8 Verify signal strength with signal meter.
9 As above, verify condition and connections of coax cables as well as
verify quality of signal to that drop.
a signal meter.
10 Rescan channels on that unit.
if the channel is coming in poorly since if the console is looking
at the wrong channel number entirely, this should manifest as a
black TV screen rather than poor video quality.

Machine Controls Unresponsive

Description

Machine controls do not respond to input.
workout parameters.

Possible Causes

1 Cable from machine controls to upper board is damaged or not
inserted properly.
2 Machine controls have failed

Possible Remedies

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
If the channel does not appear, perform the same
If this is disconnected or damaged,
If the cable passes visual inspection, use a
If the TV channel appears,
Verify signal strength using
This is less likely to be the problem
User is unable to change
Replace the
If the TV channel now
If not, have the
If
Page 120