Figure 150: Stairarm Height Measurement; Figure 151: Flat Belt Terminal Adjustment - Precor AMT Series Service Manual

Figure 150: Stairarm Height Measurement

39 If the measurement is too low or too high, tighten or loosen the
adjustment bolt until the 3 7/8 inch measurement is achieved.

Figure 151: Flat Belt Terminal Adjustment

40 Repeat the process for the remaining stairarm.
41 Fully tighten the stop bolt, torque to 300 inch pounds (25 ft-lbs)
or 25 foot pounds.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 223