Figure 319: H-Brake Drum - Units Built After 10-1-1012; Figure 320: Incline Motor Mounting - Precor AMT Series Service Manual

Figure 319: H-Brake Drum - Units Built After 10-1-1012

Incline Motor Installation
1 Attach the replacement Incline motor to the frame using the 3/8-16
mounting bolt.

Figure 320: Incline Motor Mounting

2 Connect the incline motor cable connector to the lower PCA and
replace the lower PCA cover as per procedure,
and Battery Bracket
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
(on page 270).
Replacing the Lower PCA
Page 362