P80 Settings Table - Precor AMT Series Service Manual

P80 Settings Table

Menu Item Description
About System information settings
provide basic information
including equipment models
and serial numbers. Most of
these settings are for
informational purposes only
and cannot be modified.
Equipment The Equipment Usage
Usage settings provide information
on individual usage as well
as cumulative equipment
usage. This information and
these settings are accessible
only to administrators and
registered service
technicians.
System Use the System Settings to
Settings test your equipment and set
parameters that benefit your
users and your facility. The
System Settings menu is
visible only to administrators
and registered service
technicians.
Software Allows software to be
Downloads automatically downloaded.
It is recommended that this
remain ON at all times.
Contact Precor Customer
Service before this setting is
disabled.
Reflashing Used in advanced
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Settings
Navigation
Touch About
Touch
Equipment
Usage
Touch
System
Settings
Touch
Software
Downloads
Touch
Configure/View/Test
See Procedure, P80
About (on page 54)
See Procedure, P80
Equipment Usage (on
page 57)
See Procedure, P80
System Settings (on
page 58)
Touch radio button next
to On to Enable
Automatic Downloads.
Default is ON
Touch radio button next
to Off to Disable
Automatic Downloads.
Contact Precor
Page 53