P80 Cloning Settings Table; P80 Cloning Procedure - Precor AMT Series Service Manual

P80 Cloning Settings Table

Settings that Can Be Cloned
Menu
Display
Workout Limits
TV Settings
Network Settings
Connectivity

P80 Cloning Procedure

The following procedure will explain how to save existing P80 console
settings onto a USB Flash Drive and then import the saved settings into
another P80 console.
Note: Settings from one P80 console will need to be configured manually and
imported to a flash drive device before cloning and exporting to additional P80
consoles.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Settings
Measurement of Units
Standby Mode Delay
Time Zone
Closed Captioning
Language
Maximum Workout Duration
Maximum Pause Time
Summary Time Out
Resistance Range (RBK, UBK only)
Speed Limit (TRM only)
Incline Limit (TRM only)
Auto Stop (TRM only)
CrossRamp Auto Level (EFX only)
Channel Guide
Region
Default Channel
Skip Unnamed Channels
Primary DNS – Manual only
Secondary DNS – Manual only
Gateway – Manual only
Netmask – Manual only
Network Type
Preva Server Address
Page 89