Documenting P30 Software Problems - Precor AMT Series Service Manual

Press the OK key.
Use the , keys to select
the either Show Programs or
Set Hidden
Hide Programs.
Programs
Press the OK key to save
selection and exit to Club
Settings.
Press the OK key.
Pressing the , keys
changes the active column.
Pressing the corresponding
, resistance keys
Set Custom
changes the resistance
Programs
value for that column.
Press the OK key to save
program and exit to Club
Settings.
Press the PAUSE key exit
Club Settings.

Documenting P30 Software Problems

When a problem is found with the software in the upper or lower PCA,
record the information listed below.
When a problem occurs, record the following information:
♦ Model and serial number
♦ Software version number
♦ Program number running when the problem occurred
A description of:
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
A list of available default settings
will be displayed, including:
SHOW PROGRAMS
HIDE PROGRAMS
SET CUSTOM PROGRAMS will be displayed.
When this function is initiated, the currently
stored custom program (#1 or #2) is displayed in
the matrix. The first column is active; all the
LEDs in that column blink. The resistance value
for that column is displayed in the message bar.
Page 27