Figure 138: Flat Belt Terminal Covers; Figure 139: Flat Belt Removal - Terminal - Precor AMT Series Service Manual

Figure 138: Flat Belt Terminal Covers

Flat Belt Removal - Rear Terminal
Note: Any time the flat belt terminal screws are removed from the flat belt
clamp or cams, the screws must be discarded and replaced with new
screws.
10 Remove and discard the two 1/4-20X1 screws and shims that secure the
flat belt to the clamp.

Figure 139: Flat Belt Removal - Terminal

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 213