Figure 326: Gas Shock
7 Release the tension from both of the inside flat belts. Incline up
the stairarms and pull the flat belts off the flat belt pulleys and
gently set the stairarm down.
Incline Motor Removal
8 Remove the hitch pin from the Incline motor mounting pin.
9 Remove the Incline motor mounting pin, if the Incline is jammed or
has excessive pressure on the pin,
pin out of the Incline motor tube and Incline platform using a punch
and rubber mallet.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
it may be necessary to drive the
Page 369