Procedure; Figure 306: H-Brake Belt And H-Brake Cam; Figure 307: H-Brake Belt Assembly - Precor AMT Series Service Manual

Figure 306: H-Brake Belt and H-Brake Cam

Procedure

1 Remove the covers as described per procedure,
page 152).
H-Brake Belt Removal
2 Remove the

Figure 307: H-Brake Belt Assembly

3 Slide the right side belt clamp off the cam towards the right,
thread the clamp under the cam and out to the left side of the AMT.
4 Slide the left side belt clamp off the cam towards the right and
remove.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
H-Brake tension bolt, the two washers and nut.
Cover Replacement
(on
Page 351