Channel Guide; To Scan For Available Channels; To Name A Channel; To Delete A Channel From The Channel Guide - Precor AMT Series Service Manual

Channel Guide

The following procedure discusses how to set up the channel guide and
how to configure audio and video playback.
Note: The correct region must be set before you scan for available channels.
To confirm the settings, touch Region, a list of regions will be displayed.
Confirm that the radio button next to the appropriate region for your area is
selected. If the highlighted region is incorrect, touch on the radio button next to
appropriate region. Touch OK, and then touch t BACK to the TV Settings
menu.

To scan for available channels:

1 Touch Channel Guide from the TV Settings menu.
2 Touch Scan Channel.
3

To name a channel:

4 Touch a channel from the channel guide list.
5 Touch Channel Name. A key board will be displayed.
6 Type in the desired channel name.
7 Touch OK.
The console scans for available channels and when the scan is finished
all available channels will be displayed on the screen.

To delete a channel from the Channel Guide:

1 On the Channel Guide screen, touch the listing for the channel you
want to delete.
2 Touch the DELETE button.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 83