Front Rear Cover Replacement - Precor Experience Series Service Manual

Front Rear Cover Replacement

This procedure replaces the Front Rear cover.
ID
Removal Instructions
1. Remove the front top cover, see
2. Remove the two #3 Phillips screws at the top of the front rear cover. Then slide the
cover forward to release the cover mounting hooks and upward to remove. Retain
part(s) and/or fastener(s) for installation.
Installation Instructions
1. Slide the front rear cover bottom mounting hooks into position on the left and right
cover hook mounts.Then press the cover into position on the top of the left and right
side covers. Secure using the two #3 Phillips screws at the top of the front rear cover.
Fully tighten the screws.
2. Reinstall the front top cover, see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Front Rear Cover
"" on page 64.
"" on page 64.
6 Replacement Procedures
Covers and Panels Replacement
Page 66