Figure 282: Drive Input Assembly Alignment; Figure 283: Lift Arm And Belt Clamps - Precor AMT Series Service Manual

Figure 282: Drive Input Assembly Alignment

21 Remove the four 3/8-16 X 3 mounting bolts and washers that secure
the flat belt clamps to the Lift Arm.

Figure 283: Lift Arm and Belt Clamps

22 Remove the five 5/16-18X1 mounting bolts that secure the left and
right side arm housings to the input housing.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 333