Figure 286: Lift Arm Housing And Drive Input Housing; Figure 287: Drive Input Assembly Alignment - Precor AMT Series Service Manual

Figure 286: Lift Arm Housing and Drive Input Housing

25 Fasten the replacement drive input housing to the frame using the
four mounting bolts removed in step 9, torque to 160 inch pounds.
Note: Ensure the drive input alignment tab is position to the left side.

Figure 287: Drive Input Assembly Alignment

26 Assemble the left and right side arm housings on the drive input
housing and secure with the five 5/16-18X1 mounting bolts.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 335