Figure 8: Option Cap Back Cover; Figure 9: Rear Console Cover - Precor AMT Series Service Manual

Figure 8: Option Cap Back Cover

11 Remove the 6 screws that fasten the rear cover from the console and
remove.

Figure 9: Rear Console Cover

12 Disconnect the Metric cable (J5), Machine Controls cable (J4),
Option Cap cable (J6, if applicable), Keypad Metric cable (J2) and
HR cable (J10) from the Upper PCA board.
13 Remove the five screws that fasten the Upper PCA board to the
console and remove the Upper.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 32