Figure 20: P80 Sign In Access - Precor AMT Series Service Manual

Note: The keypad X configuration sequence should be not faster than 1
second between each key stroke. Any speed faster than 1 second may result
in an unsuccessful access to the sign-in screen.

Figure 20: P80 Sign In Access

2 The sign-in screen will be displayed. Type in the technician access
,5,1,7,6,5,7,6,1, and then touch OK. The Settings menu will be
displayed. See Settings Table,
3
Use the System mode to configure settings in ways that benefit the
users and the facility. Changes made to these settings save to the
fitness equipment. To select a Setting touch on an item in the
Settings menu.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
P80 Settings Table
(on page 53).
Page 52