P80 Connectivity Settings Table
Connectivity settings
Settings
Network Type
Configuration
Status
IP Address
Preva Server
P80 Connectivity Set Up and Registration Procedure
1 Before you attempt to connect to the Precor Preva Server, check the
status field and ensure that the Connected is displayed.
Status field shows Not Connected, you will need to diagnose your
networking issue. Continue with Step 2. If the Status Field shows
Connected go to step 3.
2 Either the Ethernet cable is not connected or there is a problem
with the network connection.
the Status field again. If the Status field shows Connected continue
with step 3. If the Status field still shows Not Connected contact
your IT expert.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Default
Detail
Wired
Automatic Automatic (DHCP) or
Manual (Static IP)
Press Network Settings
to view the:
IP Address
Netmask
Gateway
DNS Primary
DNS Secondary
Connected –Connected
N/A
to the network.
Not Connected – Not
connected to the
network
N/A
Location-specific
na.preva.precor.com
Check the connection and then check
If the
Page 71