Overview Of Important Parameters; Profienergy - Siemens SINAMICS S120 Function Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Communication

10.3 Communication via PROFINET IO

Overview of important parameters

Overview of important parameters (see SINAMICS S120/S150 List Manual)

PROFIenergy is an energy management system for production plants, based on the

PROFINET communication protocol. The PROFIenergy functionality is combined in a profile.

Drive units which have PROFIenergy functionality, can be certified in an approved

laboratory. Certified devices support the PROFIenergy commands and respond accordingly

to the requirements and operating states.

Fields of application for PROFIenergy

Using PROFIenergy, energy usage in non-operational periods can be analyzed, regulated

and optimized.

● The drive units are activated and deactivated as required by the process.

● The drive units provide standardized consumption data for analysis

● The PROFIenergy state of the participating devices is displayed.

● The PROFIenergy state is available with BICO interconnections for further processing,

If there is a checkmark after each telegram type in STARTER, then the Shared Device

has been successfully configured.

PN number of remote controllers

SI enable functions integrated in the drive (Control Unit)

SI enable functions integrated in the drive (Motor Module)

e.g. to shutdown secondary systems that are not required.

Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3

Drive functions