Table 2-6 Dt330 Compatibility Settings; Table 2-7 Firmware Compatibility Matrix - NEC Univerge SV8100 Features And Specifications Manual

Issue 8.01
When a single line phone is connected to an AP(R)-R or APR-L, the 2nd channel of ESI

must be used (Programs 10-03-06 and 10-03-07) to switch back and forth between a call
and call waiting.
APR-L does not support DTL-2E-1, DTL-6E-1, or all ITL style phones.

ADA-L can send confirmation sound to far end, but the recording machine must generate

confirmation sound.
ADA-L Unit Switch
Settings
ADA Connection for
Recording Only.
ADA Connection for
Sending Recorded
Calls to the Telephone.
To Send and Receive
to the Terminal
Lot Numbers: I, J – Hardware Revision
Lot Numbers: L, M, S – Software Revision
To verify DT-330 terminal firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.

Terminal xxx I xx or lower
Lot
(Version 8.10 and 1, E0 or lower)
Number
xxxJxx or higher
DT-330
(Version 2.20 or higher)
BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-L Unit firmware, hold

down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.
Default Settings
None
2 - 54

Table 2-6 DT330 Compatibility Settings

xxx I Lx or lower
(Version 1.E0 or lower)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Not supported

Table 2-7 Firmware Compatibility Matrix

Terminal Lot Number DT-330
xxx I Mx
(Version 8.10)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
BCH-L Unit Lot Number
xxxDxx or lower
Supported
Not supported
UNIVERGE SV8100
xxxJSx or higher
(Version 2.20 or higher)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
xxxExx or higher
Supported
Supported
Ancillary Device Connection