Table 2-6 Dt330 Compatibility Settings - NEC Univerge SV8100 Features And Specifications Manual

Issue 7.0
A single line telephone connected to an AP(R)-R Unit or AP(A)-R Unit does not support

Message Waiting Indication or Caller ID Indication.
An AP(R)-R Unit (analog port adapter with ringer) can be installed on a multiline terminal

and function separately from the multiline terminal.
When Program 10-03-06 is assigned as APR you cannot manually assign a port number for

an APR. The system uses ports 193~256 (starting with 256 and working down) for a total
of 64 APR ports. APR 1 uses port 256, and APR 2 uses port 255, and so on.
When Program 10-03-06 is assigned as APR you cannot manually assign a port number for

the APR.
DTP-2DT-1 and DTR-2DT-1 telephones have a built-in APA adapter.

Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit time

expires (Program 21-01-03).
When a single line phone is connected to an AP(R)-R or APR-L, a conference cannot be

established unless the 2nd channel of ESI is used for APR in Program 10-03-06 and
Program 10-03-07.
When a single line phone is connected to an AP(R)-R or APR-L, the 2nd channel of ESI

must be used (Programs 10-03-06 and 10-03-07) to switch back and forth between a call
and call waiting.
APR-L does not support DTL-2E-1, DTL-6E-1, or all ITL style phones.

ADA-L can send confirmation sound to far end, but the recording machine must generate

confirmation sound.
ADA-L Unit Switch
Settings
ADA Connection for
Recording Only.
ADA Connection for
Sending Recorded
Calls to the Telephone.
To Send and Receive
to the Terminal
Lot Numbers: I, J – Hardware Revision
Lot Numbers: L, M, S – Software Revision
To verify DT-330 terminal firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the terminal.

2 - 52

Table 2-6 DT330 Compatibility Settings

xxx I Lx or lower
(Version 1.E0 or lower)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Not supported
Terminal Lot Number DT-330
xxx I Mx
(Version 8.10)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
UNIVERGE SV8100
xxxJSx or higher
(Version 2.20 or higher)
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Dip switches 2, 3, 5, 7
and 8 are OFF. Switches
1, 4 and 6 are ON.
Dip switches 1, 2, 3, 5, 7
and 8 are OFF. Switches
4 and 6 are ON.
Ancillary Device Connection