Display Gvrp Local-Vlan; Display Gvrp State - H3C S7500E Series Command Reference Manual

Examples
# Display GARP timer settings on port GigabitEthernet 2/0/1.
<Sysname> display garp timer interface GigabitEthernet 2/0/1
GARP timers on port GigabitEthernet2/0/1

display gvrp local-vlan

Syntax
display gvrp local-vlan interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display gvrp local-vlan command to display the local VLAN information maintained by GVRP
on the specified port.
Examples
# Display the local VLAN information maintained by GVRP on GigabitEthernet 2/0/1.
<Sysname> display gvrp local-vlan interface GigabitEthernet 2/0/1
Following VLANs exist in GVRP local database:
1(default),2-500

display gvrp state

Syntax
display gvrp state interface interface-type interface-number vlan vlan-id [ | { begin | exclude |
include } regular-expression ]
Garp Join Time
Garp Leave Time
Garp LeaveAll Time
Garp Hold Time
: 20 centiseconds
: 60 centiseconds
: 1000 centiseconds
: 10 centiseconds
17-3