Display Counters - H3C S7500E Series Command Reference Manual

Lan switching
Hide thumbs Also See for S7500E Series:
Table of Contents

Advertisement

Field
Administratively
Link-Aggregation interface
down
OAM connection failure
DLDP connection failure
Loopback detection-protected
BPDU-protected
Monitor-Link uplink down

display counters

Syntax
display counters { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display counters command to display traffic statistics for interfaces.
If an interface type is specified, this command displays traffic statistics for all interfaces of the
specified type.
The port was brought down with the shutdown command. To restore the
physical state of the interface, use the undo shutdown command.
The aggregate interface corresponding to the aggregation group to which the
current interface belongs was shut down with the shutdown command.
OAM connection fails (possibly because the connection fails to be
established or the current connection is disconnected).
DLDP connection fails (possibly because the connection fails to be
established or the current connection is disconnected).
The interface is shut down because a loop is detected on it.
The interface is shut down by the BPDU guard function.
The uplink of the current monitor link group to which the current interface
belongs is down.
1-7
Description

Advertisement

Table of Contents
loading

Table of Contents