H3C S7500E Series Command Reference Manual page 192

Illegal: 0 packet(s)
Sent LACP Packets: 7 packet(s)
Table 9-4 display link-aggregation member-port command output description
Field
Flags
Aggregation Interface
Local
Port Number
Port Priority
Oper-key
Flag
Remote
System ID
Received LACP Packets
Illegal
Sent LACP Packets
One-byte LACP state flags field. From the least to the most significant bit, they
are represented by A through H as follows:
A indicates whether LACP is enabled. 1 for enabled and 0 for disabled.
B indicates the timeout control value. 1 for short timeout, and 0 for long
timeout.
C indicates whether the link is considered as aggregatable by the sending
system. 1 for true, and 0 for false.
D indicates whether the link is considered as synchronized by the sending
system. 1 for true, and 0 for false.
E indicates whether the sending system considers that collection of incoming
frames is enabled on the link. 1 for true and 0 for false.
F indicates whether the sending system considers that distribution of
outgoing frames is enabled on the link. 1 for true and 0 for false.
G indicates whether the receive state machine of the sending system is using
default operational partner information. 1 for true and 0 for false.
H indicates whether the receive state machine of the sending system is in the
expired state. 1 for true and 0 for false.
If a flag bit is set to 1, the corresponding English letter that otherwise is not
output is displayed.
Aggregate interface to which the current member port belongs
Information about the local end
Number of the port
LACP priority of the port
Operational key
LACP protocol state flag
Information about the remote end
System ID of the remote end, comprising the system LACP priority and the
system MAC address
Total number of LACP packets received
Total number of illegal packets
Total number of LACP packets sent
9-9
Description