Display Counters Rate - H3C S7500E Series Command Reference Manual

If no interface type is specified, this command displays traffic statistics for all interfaces that have
traffic counters.
Examples
# Display inbound traffic statistics for all GigabitEthernet interfaces.
<Sysname> display counters inbound interface gigabitethernet
Interface
GE2/0/1
GE2/0/2
GE2/0/3
GE2/0/4
Overflow: more than 14 decimal digits(7 digits for column "Err").
--: not supported.
Table 1-3 display counters command output description
Field
Interface
Total (pkts)
Broadcast (pkts)
Multicast (pkts)
Err (pkts)
Overflow: more than 14
decimal digits(7 digits for
column "Err").
--: not supported.

display counters rate

Syntax
display counters rate { inbound | outbound } interface [ interface-type ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
inbound: Displays inbound traffic rate statistics.
Total(pkts) Broadcast(pkts)
100
0
Overflow Overflow
0
Abbreviated interface name
Total number of packets received or sent through the interface. (You can
specify a traffic direction by using the inbound or outbound keyword.)
Total number of broadcast packets received/sent through the interface. (You
can specify a traffic direction by using the inbound or outbound keyword.)
Total number of multicast packets received/sent through the interface. (You
can specify a traffic direction by using the inbound or outbound keyword.)
Total number of error packets received/sent through the interface. (You can
specify a traffic direction by using the inbound or outbound keyword.)
The command displays Overflow, if:
The data length of an error statistic is greater than 7 decimal digits.
The data length of a statistic of any other type is greater than 14 decimal
digits.
The statistical item is not supported.
Multicast(pkts) Err(pkts)
100 0
0 0
Overflow OverFlow
0 0
Description
1-8
0
0
0