Alarm Oam-Vendor-Specific Enable; Alarm Onu-Over-Limitation Enable - H3C S7500E Series Command Reference Manual

[Sysname-Olt3/0/1] alarm oam local-link-fault enable

alarm oam-vendor-specific enable

Syntax
alarm oam-vendor-specific enable
undo alarm oam-vendor-specific enable
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm oam-vendor-specific enable command to enable the oam vendor specific alarm.
Use the undo alarm oam-vendor-specific enable command to disable the oam vendor specific
alarm.
This alarm is customized by a vendor.
By default, the oam vendor specific alarm is enabled.
Examples
# Enable the oam vendor specific alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm oam-vendor-specific enable

alarm onu-over-limitation enable

Syntax
alarm onu-over-limitation enable
undo alarm onu-over-limitation enable
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm onu-over- limitation enable command to enable ONU over limitation alarm.
Use the undo alarm onu-over- limitation enable command to disable ONU over limitation alarm.
When the total number of ONUs connected to an OLT exceeds the limit, an alarm is generated.
By default, the onu over limitation alarm is enabled.
Examples
# Enable the onu over limitation alarm on OLT 3/0/1.
4-14