Display Epon-Capability Interface - H3C S7500E Series Command Reference Manual

[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] dba-parameters discovery-frequency 30

display epon-capability interface

Syntax
display epon-capability interface interface-type interface-number
View
Any view
Default Level
2: System level
Parameters
interface-type: Port type, which can be OLT or ONU.
interface-number: OLT/ONU port number.
As for the interface-number argument, the format of LPU slot number/sub-LPU slot number/OLT
port number is used for OLT ports; and the format of LPU slot number/sub-LPU slot number/OLT
port number:ONU port number is used for ONU ports.
To create an ONU port, use the using onu command in OLT port view.
Description
Use the display epon-capability interface command to display OLT or ONU capability information.
If interface-type interface-number identifies an OLT port, the following information about the OLT
is displayed: automatic gain control (AGC) time and clock data recovery (CDR) time.
If interface-type interface-number identifies an ONU port, the following information about the ONU
is displayed: laser on time, laser off time, and grant FIFO deep.
Before displaying the version information about an ONU, make sure the ONU is bound and is in
Up state (that is, the ONU is online). Refer to the bind onuid command for more.
Before displaying the version information about an OLT, make sure the OLT is in Up state.
2-4