H3C S7500E Series Command Reference Manual page 346

If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Examples
# Display the types of advertisable optional LLDP TLVs of interface GigabitEthernet2/0/1.
<Sysname> display lldp tlv-config interface gigabitethernet 2/0/1
LLDP tlv-config of port 1[GigabitEthernet2/0/1]:
NAME
Basic optional TLV:
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
Management Address TLV
IEEE 802.1 extend TLV:
Port VLAN ID TLV
Port And Protocol VLAN ID TLV
VLAN Name TLV
IEEE 802.3 extend TLV:
MAC-Physic TLV
Power via MDI TLV
Link Aggregation TLV
Maximum Frame Size TLV
LLDP-MED extend TLV:
Capabilities TLV
Network Policy TLV
Location Identification TLV
Extended Power via MDI TLV
Inventory TLV
Table 20-5 display lldp tlv-config command output description
LLDP tlv-config of port 1
NAME
STATUS
DEFAULT
STATUS
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Field
Advertisable optional TLVs of port 1
TLV type
Indicates whether TLVs of a specific type are currently sent through a
port
Indicates whether TLVs of a specific type are sent through a port by
default
DEFAULT
YES
YES
YES YES
YES YES
YES YES
YES
YES YES
YES
YES
YES
YES
YES YES
YES
YES
NO NO
YES YES
YES
20-16
Description