H3C S7500E Series Command Reference Manual page 99

Field
PHY admin state for ethernet port : UP
Flow-control : closed
Auto-negotiation state : enable
Port-isolate : disable
Mid-type : auto
Port-policy :
inbound : none
outbound : none
Vlan-configration :
Current-vlan-mode : transparent
Multicast-vlan : none
Multicast-group-number : 64
Multicast-strip-tag : disable
Current Status
Link-state : UP
Auto-negotiation advertised technology
ability :
100BASE-TX
Full duplex 100BASE-TX
10BASE-T
Full duplex 10BASE-T
Description
Administrative state of the port, which can be:
UP: The port is brought up with the undo shutdown
command.
DOWN: The port is manually shut down.
Flow control state, which can be:
open: Flow control is enabled.
closed: Flow control is disabled.
Auto-negotiation state, which can be:
enable: Auto-negotiation is enabled.
disable: Auto-negotiation is disabled.
Whether the port joins a port isolation group:
enable: The port has joined a port isolation group.
disable: The port has not joined a port isolation group.
Cable type supported by the UNI port, which can be:
across: Crossover cables.
auto: Both crossover cables and straightthrough cables
normal: Straightthrough cables
Upstream/downstream traffic policing parameters of the UNI:
inbound: Upstream traffic policing parameters
outbound: Downstream traffic policing parameters
VLAN mode
Number of multicast groups supported by the UNI
Whether it is enabled to strip the VLAN tag off the downstream
multicasts on the UNI
Display the current status
Layer-2 link state
Auto-negotiation advertisement ability:
100BASE-TX
Full duplex 100BASE-TX
10BASE-T
Full duplex 10BASE-T
3-11