Shutdown - H3C S7500E Series Command Reference Manual

If you specify the null keyword, this command clears the statistics on interface Null 0 with or
without the 0 keyword, because the device supports only one interface Null 0.
Examples
# Clear statistics on interface Null 0.
<Sysname> reset counters interface null 0

shutdown

Syntax
shutdown
undo shutdown
View
Loopback interface view
Default Level
2: System level
Parameters
None
Description
Use the shutdown command to shut down the current loopback interface.
Use the undo shutdown command to bring up the current loopback interface.
By default, a loopback interface is up.
Examples
# Shut down loopback interface loopback 1.
<Sysname> system-view
[Sysname] interface loopback 1
[Sysname-Loopback1] shutdown
6-9