Reset Packet-Drop Interface - H3C S7500E Series Command Reference Manual

View
User view
Default Level
2: System level
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Description
Use the reset counters interface command to clear the statistics of an interface.
Before collecting traffic statistics for a specific period of time on an interface, clear the old statistics
first.
If no interface type is specified, this command clears statistics for all interfaces.
If only the interface type is specified, this command clears statistics for all interfaces of the
specified interface type.
If both the interface type and interface number are specified, this command clears statistics for the
specified interface.
Examples
# Clear the statistics of GigabitEthernet 2/0/1.
<Sysname> reset counters interface gigabitEthernet 2/0/1

reset packet-drop interface

Syntax
reset packet-drop interface [ interface-type [ interface-number ] ]
View
Any view
Default Level
2: System level
Parameters
interface-type: Specify an interface type, you can specify 100 Mbps port, Gigabit interface or
10-Gigabit interface.
interface-number: Specify an interface number.
Description
Use the reset packet-drop interface command to clear statistics of dropped packets on an interface
or multiple interfaces. Sometimes when you want to collect the statistics of dropped packets on an
interface, you need to clear the old statistics on the interface first.
If you do not specify an interface type or interface number, this command clears statistics of
dropped packets on all the interfaces on the device.
If you specify an interface type only, this command clears statistics of dropped packets on the
specified type of interfaces.
If you specify both the interface type and interface number, this command clears statistics of
dropped packets on the specified interface.
1-35