Onu Bind Batch; Onu-Event - H3C S7500E Series Command Reference Manual

onu bind batch

Syntax
onu bind batch [ slot slot-id ]
View
FTTH view
Default Level
2: System level
Parameters
slot slot-id: Specifies a slot by its ID.
Description
Use the onu bind batch command to enable batch ONU binding.
By default, batch ONU binding is disabled.
With this command configured, only the current quiet ONU MAC addresses are bound to the ONU
ports, and the ONUs joining subsequently will not be bound.
Do not configure this command together with the onu bind auto command.
Examples
# Enable batch ONU binding in slot 2.
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] onu bind batch slot 2

onu-event

Syntax
onu-event { debug | log | trap } enable level severity
undo onu-event { debug | log | trap }
View
ONU port view
Default Level
2: System level
Parameters
debug: Displays the types of debugging information allowed to be output by the ONU on the OLT.
log: Displays the log information generated by the ONU on the OLT.
trap: Displays the trap information generated by the OLT on the ONU.
severity: Severity level of the information that the ONU reports to the OLT. The severity levels include
(in the descending order of priority):
emergencies, alerts, critical, errors, warnings, notifications, information, and debugging.
3-19