Alarm Llid-Mismatch Enable; Alarm Llid-Mismatch Threshold - H3C S7500E Series Command Reference Manual
Lan switching
Hide thumbs
Also See for S7500E Series:
- Command manual (1565 pages) ,
- Operation manual (1344 pages) ,
- Command reference manual (308 pages)
Table of Contents
Advertisement
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm frame-error-rate enable command to enable the frame error rate alarm.
Use the undo alarm frame-error-rate enable command to disable the frame error rate alarm.
By default, the frame error rate alarm is enabled.
Examples
# Enable the frame error rate alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm frame-error-rate enable
alarm llid-mismatch enable
Syntax
alarm llid-mismatch enable
undo alarm llid-mismatch enable
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm llid-mismatch enable command to enable the LLID mismatch frame alarm.
Use the undo alarm llid-mismatch enable command to disable the LLID mismatch frame alarm.
By default, the LLID mismatch frame alarm is disabled.
Examples
# Enable the LLID mismatch frame alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm llid-mismatch enable
alarm llid-mismatch threshold
Syntax
alarm llid-mismatch threshold threshold
undo alarm llid-mismatch threshold
4-4
Advertisement
Table of Contents
