H3C S7500E Series Command Reference Manual page 344

Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1 [GigabitEthernet2/0/1]:
Port status of LLDP
Admin status
Trap flag
Polling interval
Number of neighbors:
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 5
Table 20-4 display lldp status command output description
Field
Global status of LLDP
The current number of LLDP
neighbors
The current number of CDP
neighbors
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
: 4
: 2s
: 2s
: 5s
: 3
: Enable
: Tx_Rx
: No
: 0s
5
: 2
: 0
: 12
Indicating whether LLDP is globally enabled
Total number of the LLDP neighbor devices
The current number of CDP neighbors
Time the neighbor information is latest updated
LLDPDU transmit interval
TTL multiplier
LLDP re-initialization delay
LLDPDU transmit delay
Interval to send traps
Number of the LLDPDUs sent each time fast LLDPDU transmission is
triggered
LLDP status of port 1
Indicates whether LLDP is enabled on the port.
20-14
Description