14
Super VLAN Configuration Commands
Super VLAN Configuration Commands
display supervlan
Syntax
display supervlan [ supervlan-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
supervlan-id: Super VLAN ID, in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display supervlan command to display the mapping between a super VLAN and sub-VLANs,
and the information of these VLANs.
Related commands: supervlan and subvlan.
Examples
# Display the mapping between a super VLAN and sub-VLANs.
<Sysname> display supervlan 2
Supervlan ID : 2
Subvlan ID : 3-5
VLAN ID: 2
VLAN Type: static
It is a Super VLAN.
Route Interface: configured
IP Address: 10.153.17.41
Subnet Mask: 255.255.252.0
Description: VLAN 0002
Name: VLAN 0002
Tagged
Ports: none
14-1