H3C S7500E Series Command Reference Manual page 292

Please wait... Done.
[Sysname-GigabitEthernet2/0/1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer 2 aggregate interface Bridge-aggregation 1 with the IP subnet-based
VLAN 3 (assuming that Bridge-aggregation 1 does not have member ports).
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
Please wait... Done
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
# Associate the hybrid Layer 2 aggregate interface Bridge-aggregation 1 with the IP subnet-based
VLAN 3. Among the member ports of the aggregation group corresponding to Bridge-aggregation 1,
GigabitEthernet 2/0/2 is an access port and GigabitEthernet 2/0/3 is a trunk port.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
[Sysname-vlan3] quit
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port link-type access
Please wait... Done.
Configuring GigabitEthernet2/0/2... Done.
Configuring GigabitEthernet2/0/3........................................... Done.
[Sysname-Bridge-Aggregation1] port link-type hybrid
[Sysname-Bridge-Aggregation1] port hybrid vlan 3 untagged
Please wait... Done.
Configuring GigabitEthernet2/0/2... Done.
Configuring GigabitEthernet2/0/3... Done.
[Sysname-Bridge-Aggregation1] port hybrid ip-subnet-vlan vlan 3
13-36