H3C S7500E Series Command Reference Manual page 340

Field
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
Location format
Location Information
PoE PSE power source
PoE PD power source
PoE service type
Port PSE Priority
Port PD Priority
Port available power value
TLV type
Indicates whether link aggregation is supported.
Indicates whether link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is not enabled.
Maximum frame size supported
Location information format, which can be:
Invalid, indicating the format of the location information is invalid.
Coordinate-based LCI, indicating the location information is
coordinate-based.
Civic Address LCI, indicating normal address information.
ECS ELIN, indicating a telephone for urgencies.
Location information
PSE power type, which can be:
Unknown, indicating an unknown power supply
Primary, indicating a primary power supply
Backup, indicating a backup power supply
PD power type, which can be:
Unknown, indicating an unknown power supply
PSE, indicating a PSE power supply
Local, indicating a local power supply
PSE and local, indicating PSE and local power supplies
PoE service type
PoE power supply priority of PSE ports, which can be:
Unknown
Critical
High
Low
PoE power receiving priority of PD ports, which can be:
Unknown
Critical
High
Low
Available PoE power on PSE ports, or power needed on PD ports, in
watts
Unknown basic TLV type
20-10
Description