Interface Vlan-Interface - H3C S7500E Series Command Reference Manual

Field
IP Address
Subnet Mask
Tagged Ports
Untagged Ports

interface vlan-interface

Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
View
System view
Default Level
2: System level
Parameters
vlan-interface-id: VLAN interface number, in the range of 1 to 4094.
Description
Use the interface vlan-interface command to create a VLAN interface and enter its view or enter the
view of an existing VLAN interface.
Before you can create the VLAN interface of a VLAN, create the VLAN first.
Use the undo interface vlan-interface command to remove the specified VLAN interface.
You can use the ip address command in VLAN interface view to configure an IP address for a VLAN
interface to perform IP routing.
Related commands: display interface vlan-interface.
Examples
# Create VLAN-interface 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2]
Primary IP address of the VLAN interface (available only on a VLAN interface
configured with an IP address). You can use the display interface
vlan-interface command in any view or the display this command in VLAN
interface view to display its secondary IP address(es), if any.
Subnet mask of the primary IP address (available only on a VLAN interface
configured with an IP address)
Ports through which packets of the VLAN are sent tagged
Ports through which packets of the VLAN are sent untagged
13-6
Description