Display Optics-Parameters Interface - H3C S7500E Series Command Reference Manual

ONU Mac Address LLID Dist(M)
000f-e276-4b91
-------------------------------- Olt4/0/3 ------------------------------
Error: The port's state should be up!
-------------------------------- Olt4/0/4 ------------------------------
ONU Mac Address LLID Dist(M)
000f-e276-4b93
--- 3 entries found ---
# Display the information about all the silent ONUs connected to OLT 4/0/1.
<sysname> display onuinfo silent interface Olt 4/0/1
ONU Mac Address LLID Dist(M)
000f-e276-4b90
--- 1 entry found ---
For the command output description, refer to

display optics-parameters interface

Syntax
display optics-parameters interface interface-type interface-number
View
Any view
Default Level
1: Monitor level
Parameters
interface-type: Port type, which can be OLT.
interface-number: OLT port number.
Description
Use the display optics-parameters interface command to display the optical parameter information
of the OLT port.
Examples
# Display the optical parameter information of the OLT port.
<Sysname> display optics-parameters interface olt 2/0/8
Configuration source:
AGC lock time:
EPON AGC gate offset:
EPON AGC discovery offset:
EPON AGC duration:
EPON AGC polarity:
CDR lock time:
EPON CDR gate offset:
EPON CDR discovery offset:
EPON CDR duration:
EPON CDR polarity:
CDR end of grant gate offset:
CDR end of grant duration:
CDR end of grant polarity:
Optics end of grant gate offset:
Port
0 N/A N/A
Port
0 N/A N/A
Port
0 N/A N/A
Table
HOST
14
0
low
20
0
high
Board/Ver Sft/Epm
N/A N/A Silent
Board/Ver Sft/Epm
N/A N/A Silent
Board/Ver Sft/Epm
N/A N/A Silent
2-10.
18
18
32
32
36
2
low
36
2-16
State Aging
252s
State Aging
300s
State Aging
243s