H3C S7500E Series Command Reference Manual page 28

Field
frame
- overruns
aborts
- ignored
- parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts,
0 multicasts, 0 pauses
Output (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts,
0 multicasts, 0 pauses
output errors
- underruns
- buffer failures
aborts
Total number of inbound frames that contained checksum errors and
a non-integer number of bytes.
Number of packet drops because the input rate of the port exceeded
the queuing capability.
Total number of illegal packets received, including:
Fragment frames: Frames that were shorter than 64 bytes (with an
integral or non-integral length) and contained checksum errors
Jabber frames: Frames that were longer than the maximum frame
length supported on the Ethernet port and contained checksum
errors (the frame lengths in bytes may or may not be integers). For
an Ethernet port that forbids jumbo frames, jabber frames refer to
frames that are longer than 1518 bytes (without VLAN tags) or
1522 bytes (with VLAN tags) and contain checksum errors, for an
Ethernet port that permits jumbo frames, jabber frames refer to
frames that are longer than the specified length of jumbo frames
and contain checksum errors;
Symbol error frames: Frames that contained at least one
undefined symbol
Unknown operation code frames: Frames that were MAC control
frames but not pause frames
Length error frames: Frames whose 802.3 length fields did not
match the actual frame lengths (46 bytes to 1500 bytes)
Number of inbound packets dropped because the receive buffer of the
port ran low.
Total number of frames with parity errors
Outbound traffic statistics (in packets and bytes) for the port. All
outbound normal and abnormal packets, and pause frames were
counted.
Outbound normal traffic and pause frame statistics (in packets and
bytes) for the port.
Outbound error packet statistics.
Number of packet drops because the output rate of the port exceeded
the output queuing capability. This is a low probability hardware
anomaly.
Number of packets dropped because the transmit buffer of the port
ran low.
Number of packets that failed to be transmitted, for example, because
of Ethernet collisions.
1-13
Description