Display Uni-Information - H3C S7500E Series Command Reference Manual

Maximum queues per port upstream : 4
downstream queues number : 4
Maximum queues per port downstream : 4
battery backup : not support
forward error correction ability : support
forward error correction mode : disable
queue sets number : 2
queue 1 : state:1 , value:0
queue 2 : state:1 , value:0
queue 3 : state:1 , value:0
queue 4 : state:1 , value:65535
queue 5 : state:1 , value:65535
queue 6 : state:1 , value:0
queue 7 : state:1 , value:0
queue 8 : state:1 , value:0
Multicast-mode : multicast control

display uni-information

Syntax
display uni-information uni-number
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the display uni-information command to display the state information about the current UNI.
This command takes effect on H3C ONUs only.
Field Description
Maximum number of upstream queues supported per port
Number of downstream queues
Maximum number of downstream queues supported per port
Whether battery backup is supported
Whether Forward Error Correction (FEC) is supported
Whether FEC is enabled
Number of queue sets supported
Queue states and thresholds. If the value of state is 0, it
means the queue is disabled; if the value of state is 1, it
means the queue is enabled.
Multicast mode: IGMP Snooping (IGSP) or multicast control
3-9