Display Lacp System - H3C S7500E Series Command Reference Manual

Field
The brief information of
interface(s) under bridge mode
Link: ADM - administratively down;
Stby - standby
Speed or Duplex: (a)/A - auto; H -
half; F - full
Type: A - access; T - trunk; H -
hybrid
Interface
Link
Speed
Cause
display lacp system-id
Syntax
display lacp system-id [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Brief information about Layer 2 interfaces.
Link status:
ADM – The interface has been administratively shut down. To
recover its physical layer state, perform the undo shutdown
command.
Stby – The interface is operating as a backup interface
If the speed of an interface is automatically negotiated, its speed
attribute includes the auto negotiation flag, letter a in parentheses.
If the duplex mode of an interface is automatically negotiated, its duplex
mode attribute includes the auto negotiation flag, letter a in parentheses
or a capital A. Letter H indicates the half duplex mode, and letter F
indicates the full duplex mode.
Link type options for Ethernet interfaces.
The abbreviated interface name.
The physical link state of the interface.
The interface speed, in bps.
The cause of a DOWN physical link.
9-4
Description